Home Made TIG Torch Cooler

Home Made TIG Torch Cooler Video Clips. Duration : 1.83 Mins.

I made this simple torch cooler from some 1/4" pneumatic line though ice maker water line would be just fine. With this set up the torch handle has not exceeded 80 degrees. The handle, collets and tungsten is cool to touch almost immediately after welding. I did do some testing. Without the cooling system hooked up, I was getting a torch handle temperature in the 134-140 degree range after burning 1 rod. The same settings with the water cooling recorded a 78 degree temperature. Also the temperature of all components were cool to touch almost immediately. I could change the tungsten bare handed almost as fast as I could get my gloves off!

Tags: TIG Torch Cooler, Water, Welding, Longevity weldall 160pi

tig.3gp

tig.3gp Video Clips. Duration : 1.88 Mins.

me tig welding (tungsten inert gas) clarke 150 arc/tig inverter from machine mart mild steel 1mm filler wire / 1mm tungsten ground to a needle point 1mm stainless plate. pure argon shield gas and current of 35 amps. i was just messing about practising - rod got stuck to to scratch start - dc welder so can't do ally can only do steel etc

Keywords: welding, TIG welding, gtaw, arc welding, inverter

Check Out Weldcote Metals ER70S-2 .045 X 36" Tig Welding Rod 10# for $43.27

Weldcote Metals ER70S-2 .045 X 36" Tig Welding Rod 10# Best

Rate This Product :

Weldcote Metals ER70S-2 .045 X 36" Tig Welding Rod 10# Overview

Description and Applications:ER70S-2 is used primarily for single-pass welding of killed, semi-killed, andrimmed steels, but may also be used for some multi pass applications. Because of theadded deoxidants, ER70S-2 can be used for welding steels that have a rusty or dirtysurface, with a possible sacrifice of weld quality depending on the condition of thesurface. Typical specifications for these steels are ASTM A36, A285-C, A515-55 andA516-70. (As Welded)Shielding Gas: CO2 Tensile Strength (min) psi: 70,000MPa: 480Yield Strength (min) psi: 58,000MPa: 400Elongation % (min) 22Packaging: 10 LB

Customer Reviews

*** Product Information and Prices Stored: Feb 25, 2012 09:58:23

1955 Buick Century-Automotive Restoration-Spot Welding With Copper Pliers

1955 Buick Century-Automotive Restoration-Spot Welding With Copper Pliers Video Clips. Duration : 12.03 Mins.

Almost Done! www.swrnc.com or 972-420-1293

Tags: automobile, restoration, welding, spot, weld, vise, grip, pliers, copper, backing, plate, patch, panel, repair, metal, fabrication, expertvillage, professional, advise, mig, tig, instrucitonal, videos, informational, video, reality, television, show, series, automotive, overall, refinishing, concours, car, my, friend, pete, www.swrnc.com, southwest, rod, and, custom, dallas, lewisville, texas, trevor, redneck, hillbilly, style, blue, collar, working, class, america, yt:crop=16:9

Eastwood Versa Cut Plasma Cutter Review By V8TV

Eastwood Versa Cut Plasma Cutter Review By V8TV Video Clips. Duration : 3.98 Mins.

Get The Plasma: www.eastwood.com Kevin Oeste and Crew From V8TV Review Eastwood Plasma Cutter as they chop up a chassis on 110V. ersa-Cut Plasma Cutter easily slices through materials up to 3/8" thick...works anywhere with a 110v or 220v outlet Our Eastwood-designed plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 3/8". Compared to mechanical cutting, our Versa-Cut Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. Inverter technology offers superior arc stability and cutting power using either 110 or 220 volts. 110v or 220v AC input with inverter technology 20' torch cable; 10' ground cable with clamp Rated 40-amp output Air flow rate: 3.0cfm at 20-65psi Backed by Eastwood's no-hassle 3-year warranty

Keywords: V8TV, Eastwood, Plasma Cutter, Plasma Cutting, Welding, Oxy Acetylene, Torch, cutting, hotrod, street rod, fabrication, TIG, tools, tool review, 110V, video review, automobiles, steel, cars, vehicle, Fabrication (metal), muscle, car, antique, howto, how to, diy, garage, cut

Welding Aluminum with the Henrob 2000 Welding and Cutting Torch

Welding Aluminum with the Henrob 2000 Welding and Cutting Torch Video Clips. Duration : 2.47 Mins.

Jim Spradley from J&S Enterprises @ www.cutlikeplasma.com welds aluminum with the Henrob 2000 welding and cutting torch

Tags: henrob, 2000, welding, cutting, torch, plasma, welder, henrod, henrob2000, oxyacetylene, www.cutlikeplasma.com, J&S, Enerprises

Mini Kart Roll

Mini Kart Roll Video Clips. Duration : 0.50 Mins.

Lucas Offroad Series May 2009 (Round 4)

Keywords: Hot Rod, Tube Chassis, Rock Crawler, Rock Buggy, Rock Racer, Sand Rail, Dersert Rail, Dune Buggy, Small Block, Big Block, Front Bumper, Rear Bumper, Tig Welder, Tig Welding, Tig Weld, Plasma Cutter, Plasma Cut, Seat Mounts, Custom Dash, Aluminum, Mini Truck, Lockers, Locker, cheap, expensive, shocks, king, fox, beard, bus, 091

Check Out Weldcote Metals ER70S-6 .045 X 36" Tig Welding Rod 10# for $32.54

Weldcote Metals ER70S-6 .045 X 36" Tig Welding Rod 10# Best

Rate This Product :

Weldcote Metals ER70S-6 .045 X 36" Tig Welding Rod 10# Overview

Description and Applications:ER70S-6 contains higher levels of manganese and silicon than the otherstandard grades of MIG wire. This wire features excellent tolerance of rust and scale,produces the highest deposit strength of all the carbon steel MIG wires.ER70S-6 is used for butt and fillet welding of sheet and plate of a variety of thickness.Applications include general carbon steel fabrication.(As Welded)Shielding Gas: CO2 Tensile Strength (min) psi: 70,000MPa: 480Yield Strength (min) psi: 58,000MPa: 400Elongation % (min) 22Packaging: 10 LB

Customer Reviews

*** Product Information and Prices Stored: Feb 20, 2012 01:12:22

Great Price Radnor for

3/32" X 36" ER309/309L Radnor By McKay 309/309L Stainless Steel TIG Rod 10 Box [Set of 40] Best

Rate This Product :

3/32" X 36" ER309/309L Radnor By McKay 309/309L Stainless Steel TIG Rod 10 Box [Set of 40] Overview

RAD64004457 Features: -Price Is For One Pound -Minimum Order Of 40. -309/309L stainless steel cut lengths are used for joining similar 309L alloys or for joining 300-series stainless steels to carbon or low alloy steels..-RADNOR BY MCKAY.-Consistent weld deposit chemistry and procedures from package to package improve quality and save time Good bead wetting characteristics Great puddle control Clean welds, minimal ''''smut''''.-Each Heat has Tight Chemistry Tolerances..-Always use in accordance with the Material Safety Data Sheet (MSDS).-UNSPC CODE: 23271812. -TIG Rod - Stainless Steel TIG Rod Stainless Steel filler metal metals tig rod (gtaw) rods welding.-ER309L SS TIG WIRE 3/32X36 10LB.

Customer Reviews

*** Product Information and Prices Stored: Feb 17, 2012 20:32:42

Using 3 car batteries to weld (Video #1)

Using 3 car batteries to weld (Video #1) Video Clips. Duration : 1.13 Mins.

How to use car batteries to do emergency welding when out four-wheeling (or any time for that matter.)

Tags: welding, 4x4, wheeling, car, batteries, emergency, truck, battery, weld, repair, Toyota, Ford, Chevy, offroad, road, mud, rock, crawling, trucks, wheeliepete, wheelie_pete, Wheelie, Pete, electronics, DIY, preparedness

Great Price Radnor for

1/8" X 36" ER70S-2 Radnor 70S-2 Carbon Steel TIG Welding Rod 1 Tube Best

Rate This Product :

1/8" X 36" ER70S-2 Radnor 70S-2 Carbon Steel TIG Welding Rod 1 Tube Overview

RAD64001643 Features: -Price Is For One Tube -Minimum Order Of 1. -ER70S2 is a premium TIG wire for welding on all grades of mild and carbon steels, producing quality welds with minimal porosity. It is a triple deoxidized wire (Zirconium, Titanium, and Aluminum) making it an excellent choice for welding over rust and mill scale. This wire is available in 36 lengths and embossed on both ends for easy identification..-RADNOR.-Excellent welding characteristics Precise control of wire chemistry Minimal contamination of wire surface during manufacturing process Consistent weld deposit chemistry and procedures from package to package improve quality and save time Good bead wetting characteristics Great puddle control Clean welds, minimal ''''smut''''. -Always use in accordance with the Material Safety Data Sheet (MSDS).-UNSPC CODE: 23271812. -TIG Rod - Carbon Steel Small Package TIG Rod Carbon Steel Small Package filler metal metals rods (gtaw) welding.-ER70S2 TIG ROD 1/8X36 1# TU.

Customer Reviews

*** Product Information and Prices Stored: Feb 15, 2012 15:27:24

How to Use & Maintain Welding Equipment : Understand TIG Welding

How to Use & Maintain Welding Equipment : Understand TIG Welding Tube. Duration : 1.73 Mins.

Learn about TIG welding and equipment in this free educational video. Expert: Terry Leafty Bio: Terry Leafty is a welder at BC welding in Camp Verde, Arizona specializing in fabrication and construction. Filmmaker: Chuck Tyler

Keywords: free, videos, maintenance, welding, equipment, weld, tools, wire

Viper Dash Part 4

Viper Dash Part 4 Tube. Duration : 3.47 Mins.

I'll update this when I get home.

Keywords: Team, Vipette, Gen, Plymouth, Belvedere, 1953, 1954, Viper, Swap, Resto, Restomod, Mod, fabrication, tig, welding, education, rat, rod

Great Price Weldcote for $13.74

Weldcote Metals 316L 1/16" X 36" Tig Welding Rod 1# Best

Rate This Product :

Weldcote Metals 316L 1/16" X 36" Tig Welding Rod 1# Overview

DESCRIPTIONWeldcote Metals 316L has the same analysis as ER316, except that the carbon content is limited to a maximum of 0.03% in order to reduce the possibility of formation ofintergranular carbide precipitation. This filler metal is primarily used for welding low carbonmolybdenum-bearing austenitic alloys. This low carbon alloy is not as strong at elevatedtemperatures as ER316H.APPROVALS: Manufactured under Quality System approved by ASME, 1S09001. Meets AWS 5.9 Class ER316L. Approved by Canadian Welding Bureau. CHEMICAL COMPOSITION MECHANICAL PROPERTIESTensile Strength86,000 PSI 590 MPAYield Strength58,000 PSI 400 MPAElongation 36% Carbon 0.030 Manganese 1.000-2.500Silicon 0.300-0.650Chromium 18.000-20.000Nickel 11.000-14.000Molybdenum 2.500-3.000Sulfur 0.020Phosphorus 0.030Copper 0.300Packaging: 1LB Tube

Customer Reviews

*** Product Information and Prices Stored: Feb 12, 2012 11:50:35

Jasper Charles welding pop cans

Jasper Charles welding pop cans Video Clips. Duration : 0.53 Mins.

Jasper being a retard with 6010 rod on popcans.....

Tags: Jasper, Charles, Welding, Pop, Can, Naf, Native, American, Fabricators, Xoolander, Xoolander666

Welding Aluminum Part 1

Welding Aluminum Part 1 Tube. Duration : 9.37 Mins.

How-to forge weld (braze) an aluminum straight barshoe using Harris Cor-Al brazing rod and 6061 3/8" x 1" aluminum barstock. Very easy once you learn to do it, and it'll save you a ton of money on stocking aluminum barshoes.

Tags: Horseshoe, forging, forge, anvil, farrier, horseshoeing, onion, heel, farriery, blacksmith

Great Price Radnor for

3/32" X 36" ER70S-2 Radnor 70S-2 Carbon Steel TIG Welding Rod 1 Tube Best

Rate This Product :

3/32" X 36" ER70S-2 Radnor 70S-2 Carbon Steel TIG Welding Rod 1 Tube Overview

RAD64001645 Features: -Price Is For One Tube -Minimum Order Of 1. -ER70S2 is a premium TIG wire for welding on all grades of mild and carbon steels, producing quality welds with minimal porosity. It is a triple deoxidized wire (Zirconium, Titanium, and Aluminum) making it an excellent choice for welding over rust and mill scale. This wire is available in 36 lengths and embossed on both ends for easy identification..-RADNOR.-Excellent welding characteristics Precise control of wire chemistry Minimal contamination of wire surface during manufacturing process Consistent weld deposit chemistry and procedures from package to package improve quality and save time Good bead wetting characteristics Great puddle control Clean welds, minimal ''''smut''''. -Always use in accordance with the Material Safety Data Sheet (MSDS).-UNSPC CODE: 23271812. -TIG Rod - Carbon Steel Small Package TIG Rod Carbon Steel Small Package filler metal metals rods (gtaw) welding.-ER70S2 TIG ROD 3/32X36 1# TU.

Customer Reviews

*** Product Information and Prices Stored: Feb 08, 2012 02:28:34

Check Out Weldcote Metals 308L 1/16" X 36" Tig Welding Rod 1# for $10.72

Weldcote Metals 308L 1/16" X 36" Tig Welding Rod 1# Best

Rate This Product :

Weldcote Metals 308L 1/16" X 36" Tig Welding Rod 1# Overview

DESCRIPTION: Weldcote Metals 308L has the same analysis as type 308 except the carbon content has been held to a maximum of .03% to reduce the possibility of intergranular carbideprecipitation. Ideal for welding Types 304L, 321, and 347 stainless steels. This is a suitable wire forapplications at cryogenic temperatures.APPROVALS: Manufactured under Quality System approved by ASME, 1S09001. Meets AWS 5.9 Class ER308L. Approved by Canadian Welding Bureau.CHEMICAL COMPOSITION MECHANICAL PROPERTIESTensile Strength85,000 PSI 590 MPAYield Strength57,000 PSI 390 MPAElongation 40% Carbon 0.030Manganese 1.000-2.500Silicon 0.300-0.650Chromium 19.500-21.000Nickel 9.000-11.000Molybdenum 0.300Sulfur 0.020Phosphorus 0.030Cop per 0.300 Packaging: 1LB Tube

Customer Reviews

*** Product Information and Prices Stored: Feb 07, 2012 00:04:52

RE: Tig Welding

RE: Tig Welding Video Clips. Duration : 2.80 Mins.

Question for Welding Tips & Tricks.com about Tungsten, Filler Rod and Aluminum Tig Welding.

Keywords: Aluminum Welding, RMW, Corpus Christi, Tx.

Check Out Weldcote Metals 309L 1/16" X 36" Tig Welding Rod 1# for $13.74

Weldcote Metals 309L 1/16" X 36" Tig Welding Rod 1# Best

Rate This Product :

Weldcote Metals 309L 1/16" X 36" Tig Welding Rod 1# Overview

DESCRIPTION:  Weldcote Metals 309L is of similar composition as Weldcote Metals 309 except the carbon content has been held to a maximum of .03%. The lower carbon content reduces thepossibility of intergranular corrosion. Weldcote Metals 309L is preferred over 309 for claddingover carbon or low alloy steels, as well as for dissimilar joints that undergo heat treatment. APPROVALS:  Manufactured under Quality System approved by ASME, ISO9001. Meets  AWS5.9 Class ER309L. Approved by Canadian Welding Bureau. Chemical Composition: Carbon 0.030Manganese 1.000-2.500Silicon 0.300-0.650Chromium 23.000-25.000Nickel 12.000-14.000Molybdenum 0.300Sulfur 0.020Phosphorus 0.030Copper 0.300Packaging: 1 LB Tube

Customer Reviews

*** Product Information and Prices Stored: Feb 04, 2012 21:38:55

Art Home Welding Project

Art Home Welding Project Video Clips. Duration : 9.60 Mins.

A simple project for at home welders.Crafting of a basic pencil holder and a guide to welding,tools and techniques.Future kits will be available and instructional videos posted regularly.Stay tuned to Art Studio Transylvania.George

Keywords: optrel osevolution, crafting, pen holder, stainless steel, tig welding, kemppi tig, mls 2300ac dc, technique, art studio transylvania, george sorin padurean, canberra, australia, how to weld, lyons

Check Out Campbell Hausfeld WS0970 115-Volt 70 Amp Arc Stick Welder for $115.59

Campbell Hausfeld WS0970 115-Volt 70 Amp Arc Stick Welder Best

Rate This Product :

Campbell Hausfeld WS0970 115-Volt 70 Amp Arc Stick Welder Feature

• Arc stick welder powered by 115-volt current
• Welds mild or stainless steel from 18-gauge to 1/8 inch
• Dual heat setting for use with welding rods
• Automatically shuts off at duty cycle rating
• 5-year limited warranty

Campbell Hausfeld WS0970 115-Volt 70 Amp Arc Stick Welder Overview

The Campbell Hausfeld WS0970 115-volt 70 Amp arc stick welder can weld mild or stainless steel from 18-gauge to 1/8-inch thick, and is ideal for use on boat trailers, wrought iron, or automotive sheet metal. It comes with a dual heat setting for use with welding rods, and its thermal overload protection automatically shuts off the welder at its duty cycle rating. A contoured face makes operating the arc welder easy, as do the carry handle and storage clips to hold the cables in place. The Campbell Hausfeld WS0970 welder is powered by a 115-volt current and generates 70 Amps of power. A built-in storage keeps accessories organized while cord management maintains secure storage. This welder includes a welding shield, hammer/brush, electrodes, and quick start guide. Campbell Hausfeld backs its welder with a 5-year limited warranty.

What's in the Box
Welder, welding shield, hammer/brush, electrodes, and quick start guide.

Customer Reviews

*** Product Information and Prices Stored: Feb 02, 2012 14:57:17